1.877.897.8804
Your
Rapid Prototype
Rapid
prototyping (RP) is a type of
prototype
manufacturing technology that creates a
prototype by layering
thermoplastics or
similar materials from the ground up
similar to building a house with bricks.
Rapid Prototyping can produce an exact
replica of a 3d model in as little as an
hour. The implications of producing a
prototype spread into every field of
product development including
research &
development,
marketing and at times to
manufacture
production quality parts in
relatively small numbers.
Scaling, Material
and Shipping
Due to the
volumetric limitations each prototype
produced by Protomine is scaled to a
maximum 5 inches on the largest
dimensions.
Rapid
Prototypes are made of durable
thermoplastic and are available in
multiple colors.
Your
Rapid Prototype is shipped within 48
hours of finalization of your
3d
graphics package.
Your Initial Design
The design composition you
receive is in the format of what is called a
3d model
which is a 3d representation of your design. Since they
are 3 dimensional they can be rotated and examined from
any angle. Your 3d model is the core of your 3d
Graphics
Package. All of your revisions are made to your
3d model
in your 3d pdf file.
The 3d pdf is a fully interactive file for where you can
make notes, comments, etc. to resubmit for continuation
of your production process.
Are you a designer?
Although
Protomine was developed with the inventor in mind, our
primary mission is to assist both
invention and
design
in the development of their concepts.
Our overall goal is to offer
3d graphics
and rapid prototype services at a low
cost in order to allow you, as a
designer, the ability to bring your
concept to life efficiently and
effectively without braking the bank.
Although we do offer FREE services such as
presentation and
e-submission with our 3 packages, the total cost for each
package is utilized for 3d graphics and prototype
processing. So if you are designer or
inventor interested in
bringing your project to life please try our service and
we're sure you'll be satisfied!
We would love the chance to have your
service and empower you with the chance
to succeed in whatever your endeavor may
be. If you have any questions please
contact us at 1.877.897.8804 and we'll
be glad to assist you.
About: Invention Designer
A invention designer is a person who
designs something new. If you've created a
new invention
chances are you are a designer. Regardless of whether
you have developed your idea or not, you have the
designing mind. As well as amateur designers, there are
many professional designers. To be a professional
designer requires study to degree
level, work experience or specialized training. Working as an
invention designer usually
implies being creative
in a particular area of expertise. Designers are usually
responsible for developing the concept and making
drawings
or models for something new that
will be made by someone else. Their
concepts take into account not only how
something will look, but also how it will be used and
how it will be manufactured. There can be great differences
between the working styles and principles of invention
designers in different arenas.
Your Design Drawing
The
design drawing that you
submit can be quite simple. We recommend submitting more
than one design
drawing of your invention to give us a clear
understanding of your invention concept. We do not require
dimensions for designs for packages a and b.
Your Design Concept
Uploading your
design concept is easy. Simply log in to your
dashboard and follow the step by step guides. It takes about
5 minutes and you'll get a response from our team within 24
hours Guaranteed!
The design concept you submit should be in either of the 4
image file formats.
We can accept drawings without dimensions.
Your Design
Composition
The design composition you receive is in the format of
what is called a
3d model which is a
3d representation of your
design. Since they are 3 dimensional they can be rotated
and examined from any angle. Your 3d model is the core
of your
3d
Graphics Package. All of your
revisions are made to your 3d model in your
3d pdf file.
The 3d pdf is a fully interactive file for where you can
make notes, comments, etc. to resubmit for continuation
of your production process.
About:
Design Concept
Design
Methods
vary
across
various
fields
and are
based on
broad
focuses.
1.
Exploring
the
possibilities
and
similar
constraints
by
focusing
on
critical
thinking
skills
to
research
and
define
specific
problem
spaces
for
existing
products
or
services
and the
creation
of
new
product
categories.
2.
gray
fining
the
specifications
of a
design
solution
which
can lead
to
better
guidelines
for
traditional
design
activities
such as
in the
graphic,
industrial,
architectural
fields.
3.
Managing
the
process
of
exploration,
defining
and
creating
artifacts
continually
over
time.
4.
Prototyping
the
possible
to
develop scenarios
and
solutions
that
minimally
or
significantly
improve
the
current
product
development.
What does it cost for invention creation?
Manufacturers
follow a complicated and costly
product development process called
product lifecycle management
(plm). This approach encompasses
the complete lifecycle from the creation of your
concept
design through
manufacturing and
disposal
of a product. The
typical cost to get a product creation starts at around $100,000 for simple
concept designs and rises dramatically for more complicated
concepts.
What
are they promising you?
Organizations such as invention
submission companies offer costly services promising
to develop your concept for $5-$20,000 (a fraction of
what it really costs) while delivering very little in
return and producing very
poor success rates.
The Reality
Paying high prices to
outside companies to "develop"
or "patent"
your product is often unnecessary if you just want to
license
your concept. Ultimately the
distributor incurs the real costs of development and in return offers a
licensing
contract. Your job is to
present an appealing product presentation and deliver it to the right
people!
The Solution - The
Protomine Process!
In a nutshell, the Protomine
process
was created to help you create a
presentation which
represents
and
markets
your design efficiently and
effectively. Our
proprietary
process contains a complete checklist of items companies
want in order to make informed decisions on whether or
not to carry your product design. So forget about
expensive
invention submission
companies and everyone else trying to take
your money and do-it-yourself.Paying high prices to outside companies to "develop" or "patent" your product is often unnecessary if you just want to license your concept. Ultimately the distributor incurs the real costs of development and in return offers a licensing contract. Your job is to present an appealing product presentation and deliver it to the right people!
In a nutshell, the Protomine process was created to help you create a presentation which represents and markets your design efficiently and effectively. Our
So you have a great new product idea!
So you bolted awake at 3 a.m. with a can't-miss new product idea. Or it came to you in the shower, on your way to pick up the kids at soccer or out of necessity while trying to solve a problem. No matter what the inspiration, you have a new product idea. And you've got the excitement and energy to do something about it but you're not quite sure where to start
Overcome the Obstacles
In addition to setting aside your false beliefs, taking action involves shifting your approach to challenges that develop along the way. As an inventor, you're an entrepreneur who already thinks creatively. That creativity will benefit you throughout the inventing process. We encourage you to tap into those creative thinking abilities as you proceed through the inventing process. When you're confronted with a challenge, don't change your goals but your plan of action. Constantly create new options for yourself during all the steps as an inventor and you will succeed.
